/  Precision Measuring Tools  /  Precision Hand Tools  /  

Protractors & Angle Measurements

  /  

Vernier Protractors

 /

C359BZ

51394

C359BZ Precision Universal Bevel Vernier Protractor, Graduations in degrees through 360 Deg 51394

Starrett 359 Precision Universal Bevel Vernier Protractors with fi ne adjustment are designed for precision measuring and for laying out angles. The protractor is one of the most valuable and useful tools for the kit of every good toolmaker, inspector or machinist. 7" Blade, 5 min. or 1/12 Deg in Case.

Note:
This item is discontinued. Please consider the recommended alternative listed above or contact our special order department at (978) 249-3551 x410 for more information.

Features
Specifications
Parts
Downloads
Contact Starrett

Features

  • The protractor is one of the most valuable and useful tools for the kit of every good toolmaker, inspector or machinist
  • Available with hardened 7" (175mm) or 12" (300mm) blades which can be rotated to the desired angle and adjusted to the desired length
  • Both the dial and the blade can be locked independently
  • An acute angle attachment is available
  • Flush surfaces on the base permits use on height gages
  • One side of the tool is flat so it can be laid on paper or on the work
  • Satin chrome finish on all reading surfaces - eliminates glare and resists rust
  • Sharp, machine-divided graduations
  • Machine-divided graduations read to 5 minutes (1/12 of a degree) and accuracy is finer than can be read
  • The most convenient, ultra-sensitive fine adjustment for precision setting

Specifications

  • Blade Length (in): 7"
  • Blade Length (mm): 175mm
  • Graduations: 5 min. or 1/12 degree
  • Range (Deg): 0-360

Parts

    Member of Kit
    Item #DescriptionPart No.QtyInformation
    1CASE SUB ASSEMBLYNOT AVAILABLE1
    2SCREW, .140-40 SLOT X .165 LONGPT011811
    3PLATE, VERNIER01195-01
    4TURRETNOT AVAILABLE(2)1
    5CLAMP STUD SUB ASSEMPT047761
    6WSHR,.410X.969X.06204778-01
    7NUT,.406-40 CLAMP07629-01
    8CLAMP, BLADEPT133461
    9STUD SUB ASSEMBLYPT047831
    10STUD, DRIVING GEARPT047901
    11SPRING, GEAR STUDPT047911
    12CASE, TOP SIDENOT AVAILABLE(3)1
    13SCREW, #1-64 SLOT X .088 LONGPT01195A2
    14BLADE, 7" #359-7PT047801
    15STUD, END27750-01
    16SPACER, END STUD27751-01
    17INTERMEDIATE GEAR ASSEMBLY04788-01
    18STORAGE CASE ONLY, WOOD359ZZ-71NOT SHOWN

Downloads


    2D Dimensional Drawing (PDF)
    .pdf

     

    118.24 kb