/  Precision Measuring Tools  /  Precision Hand Tools  /  

Bore Gages

  /  

Dial Bore Gages

 /

84MAZ-161-5J

00035

84MAZ-161-5J Dial Bore Gages (76.2 - 131.75mm Range) 00035

Starrett 84 bore gages allow for bore measurements beyond the size range of our 82 Series. They are comparison gages and should be set with a master ring gage, gage blocks with parallel jaws, outside micrometers or vernier calipers. Ring gages are available by request, quoted by application. Good practice is to set the gage to zero, as near to the desired dimension as possible. 76.2-131.75mm Range 0.002mm Grad

Note:
This item is discontinued. Please consider the recommended alternative listed above or contact our special order department at (978) 249-3551 x410 for more information.

Features
Specifications
Parts
Contact Starrett

Features

  • Can be easily held to inspect bores and hole sizes without removing the workpiece
  • An adjustable range screw and two centralizing plungers provide accurate, three-point contact for tool alignment in larger bores
  • All contacts and centralized plungers are of hardened tool steel for wear and spring-loaded for sensitivity
  • The housing and knurled handle are aluminum for light weight and good balance
  • Dial indicators have jewel bearings for sensitivity
  • Furnished in finished wood case
  • Bore depths are also available up to 12" (300mm) in 1" (25mm) increments on special order
  • Also available with carbide contacts or electronic indicators with output capability on special order

Specifications

  • Range (mm): 76.2 - 131.75mm
  • Graduations (mm): 0.002mm
  • Approximate Measuring Depth (mm): 150mm

Parts

    Member of Kit
    Item #DescriptionPart No.QtyInformation
    1HOUSING CLAMP12271-01
    2HOUSING12270-01
    3HANDLE12370-01
    4HANDLE CAP12272-01
    5SCREW, #8-32 SHCS X .375 LONG30970-02
    6BORE GAGE SUB-ASSEMBLY12376-01
    7•EXTENSION HOUSING SUB ASSEMBLY12284-01
    8•EXTENSION PLUNGER12288-01
    9•RING, EXT RETAINING11445-01
    10•SPR WSHR, .190X.281X.00606822-01
    11•SPRING, .196X.238X1.0625X.021 X1113429-01
    12•TRANSFER BUSHING12328-01
    13•90 DEGREE TRANSFERNOT AVAILABLE1
    14•DOWEL PIN, 1.5MM X 8MM, HARDENED STEEL (ALLOY STEEL)12326-01
    15•SCREW, #3-56 SLOT X .438 LONG13472-03
    16•SCREW, #5-40 SET X .438 LONG13401-01
    17•NUT,#5-40 HEX13414-01
    18•HEAD SUBASSEMBLY12307-01
    19•SPRING RETAINING RING12314-02
    20•PLUNGER CONACLE SPRING12315-02
    21•CENTRALIZING PLUNGER12316-02
    22•MEASURE PLUNGER12317-01
    23•STOP PLUG12332-01
    24•CENTRALIZER COMPRESSION SPRING12333-01
    25•CENTRALIZER12334-01
    26•PLATE,COVER13402-01
    27•SCREW, #1-64 SLOT X .135 LONG13468-03
    28LOCK NUT12365-011
    29EXTENSION ROD 3.000 - 3.188812354-01
    30EXTENSION ROD 3.188 - 3.37512355-01
    31EXTENSION ROD 3.375 - 3.56312356-01
    32EXTENSION ROD 3.563 - 3.75012357-01
    33EXTENSION ROD 3.750 - 3.93812358-01
    34EXTENSION ROD 3.938 - 4.12512359-01
    35EXTENSION ROD 4.125 - 4.31312360-01
    36EXTENSION ROD 4.313 - 4.50012361-01
    37EXTENSION ROD 4.500 - 4.68812362-01
    38EXTENSION ROD 4.688 - 4.87512363-01
    39EXTENSION ROD 4.875 - 5.06312364-01
    40DIAL IND, 84MA-161-512389-01
    41•CASE SUB-ASSEMBLY FOR 2 TO 3 GEARPT227001
    42•GUIDE09347-01
    43•SCREW, #1-64 SLOT X .154 LONGPT093482
    44•WSHR,.100X.187X.025PT093502
    45•SCREW, #3-56 SLOT X .556 LONGPT093522
    46•PIN, .042X.187PT093581
    47•WSHR,.157X.218X.078PT093591
    48•RACK, .5MM RANGE09490-01
    49•SPRING, .166X.186X.500X.010X6PT095881
    50•10mm PLASTIC STEM CAP26402-01
    51•BACK, FLAT STEEL #25PT06608J1
    52•CLAMP SCREW12289-01
    53•BEZEL CLAMP, PLASTIC23417-01
    54•HAND, #25PT083081
    55•SCREW, #4-48 SLOT X .231 LONGPT092841
    56•DIAL STAT. 84MA-161-525692-01
    57•DIAL, MOVABLE90697-01
    58•SCREW, #3-56 PHILLIPS X .190 LONGPT093074
    59•BEZEL & CRYSTALPT994191
    60••BEZEL IND., PLASTICPT234161
    61••CRYSTAL, #25PT066221
    62•CONTACT POINTPT072151
    63•HAND, #25 TELL TALEPT066611
    64•SPR WSHR,1.593X2.020X.006PT06673A1
    65•PIN, RACK GUIDE #25PT068481
    66•BRIDGE/PLATE ASSEM.26659-01
    67••BRIDGE SUB ASSEMBLY09400-01
    68•••BRIDGE #2509408-01
    69•••BEARING, JEWEL #25PT094221
    70•••BEARING,JEWELPT094213
    71•••PIN, .094X.30009425-02
    72••PLATE SUB ASSEMBLY09437-01
    73•••PLATE09389-01
    74•••BEARING,JEWELPT094214
    75•••PIN, .093X.11109431-02
    76••HAIRSPR GEAR ASSEM.PT092891
    77••SCREW, #3-56 PHILLIP X .263 LONGPT094244
    78••SCREW, #1-64 SLOT X .148 LONG23449-01
    79••POST, HAIRSPRING09418-01
    80••PINION, HANDPT089731
    81••GEAR, RACK ASSEMBLY11852-01
    82••GEAR, INTERMEDIATE ASSEM.PT092951
    83KEY, HEX 9/64"30854-01
    84PIN, RANGE EXT. ADJ.13483-01
    85WRENCH,RANGE EXT ADJ13482-01
    86CASE ONLY, WOOD84ZZ-51NOT SHOWN