/  Precision Measuring Tools  /  Precision Hand Tools  /  

Bore Gages

  /  

Dial Bore Gages

 /

84AZ-134-4J

00030

84AZ-134-4J Dial Bore Gage (1-1/2 - 3" Range) 00030

Starrett 84 Dial Bore Gage allows for bore measurements beyond size range of our 82 Series. It is a comparison gage and should be set with a master ring gage, gage blocks with parallel jaws, outside micrometer or vernier caliper. Ring gage is available by request, quoted by application. Good practice is to set the gage to zero, as near to the desired dimension as possible. 1 1/2"-3" Range .0005" Grad

Features
Specifications
Parts
Contact Starrett

Features

  • Can be easily held to inspect bores and hole sizes without removing the workpiece
  • An adjustable range screw and two centralizing plungers provide accurate, three-point contact for tool alignment in larger bores
  • All contacts and centralized plungers are of hardened tool steel for wear and spring-loaded for sensitivity
  • The housing and knurled handle are aluminum for light weight and good balance
  • Dial indicators have jewel bearings for sensitivity
  • Furnished in finished wood case
  • Bore depths are also available up to 12" (300mm) in 1" (25mm) increments on special order
  • Also available with carbide contacts or electronic indicators with output capability on special order

Specifications

  • Range (in): 1-1/2 to 3"
  • Graduations (in): .0005"
  • Approximate Measuring Depth (in): 4"

Parts

    Member of Kit
    Item #DescriptionPart No.QtyInformation
    1HOUSING12270-01
    2HOUSING CLAMP12271-01
    3SCREW, #8-32 SHCS X .375 LONG30970-02
    4HANDLE12370-01
    5HANDLE CAP12272-01
    6BORE GAGE FRAME SUB-ASSEMBLY12375-01
    7•EXTENSION HOUSING SUB ASSEMBLY12283-01
    8•EXTENSION PLUNGER12287-01
    9•RING, EXT RETAINING11445-01
    10•SPR WSHR, .190X.281X.00606822-01
    11•SPRING, .196X.238X1.0625X.021 X1113429-01
    12•TRANSFER BUSHING12328-01
    13•90 DEGREE TRANSFER NOT AVAILABLE1
    14•DOWEL PIN, 1.5MM X 8MM, HARDENED STEEL (ALLOY STEEL)12326-01
    15•SCREW, #3-56 SLOT X .438 LONG13472-03
    16•SCREW, #3-56 SET X .559 LONG25100-01
    17•NUT,#3-56 HEX25101-01
    18•HEAD SUB ASSEMBLY12306-01
    19•RETAINING RING12310-02
    20•CONICAL SPRING12311-02
    21•CENTRALIZER PLUNGER12312-02
    22•MEASURE PLUNGER12313-01
    23•STOP PLUG12329-01
    24•COMPRESSION SPRING12330-01
    25•CENTRALIZER12331-01
    26•PLATE,COVER25113-01
    27•SCREW, #1-64 SLOT X .135 LONG13468-03
    28DIAL IND, 84A-134-412380-01
    29•CASE SUB-ASSEMBLY FOR 2 TO 3 GEARPT227001
    30•DIAL STAT. 84A-134-425683-01
    31•SCREW, #4-48 SLOT X .231 LONGPT092841
    32•CONTACT POINTPT072151
    33•PIN, RACK GUIDE #25PT068481
    34•WSHR,.100X.187X.025PT093502
    35•RACK, .050 RANGEPT094841
    36•10mm PLASTIC STEM CAP26402-01
    37•BRIDGE/PLATE ASSEM.92328-01
    38••BRIDGE SUB ASSEMBLY09400-01
    39•••BRIDGE #2509408-01
    40•••BEARING, JEWEL #25PT094221
    41•••BEARING,JEWELPT094213
    42•••PIN, .094X.30009425-02
    43••PLATE SUB ASSEMBLY09437-01
    44•••PLATE09389-01
    45•••BEARING,JEWELPT094214
    46•••PIN, .093X.11109431-02
    47••SCREW, #3-56 PHILLIP X .263 LONGPT094244
    48••POST, HAIRSPRING09418-01
    49••PINION, HANDPT089731
    50••HAIRSPR GEAR ASSEM.PT092891
    51••GEAR, RACK ASSEMBLYPT092981
    52••SCREW, #1-64 SLOT X .148 LONG23449-01
    53••GEAR, INTERMEDIATE ASSEM.PT092951
    54•SCREW, #3-56 SLOT X .556 LONGPT093522
    55•SCREW, #3-56 PHILLIPS X .190 LONGPT093074
    56•HAND, #25 TELL TALEPT066611
    57•DIAL, MOVABLE #2592298-01
    58•SPR WSHR,1.593X2.020X.006PT06673A1
    59•CLAMP SCREW12289-01
    60•BEZEL CLAMP, PLASTIC23417-01
    61•WSHR,.157X.218X.078PT093591
    62•SCREW, #1-64 SLOT X .154 LONGPT093482
    63•HAND, #25PT083081
    64•BEZEL & CRYSTALPT994191
    65••BEZEL IND., PLASTICPT234161
    66••CRYSTAL, #25PT066221
    67•GUIDE09347-01
    68•PIN, .042X.187PT093581
    69•SPRING, .166X.186X.500X.010X6PT095881
    70•BACK, FLAT STEEL #25PT06608J1
    71LOCK NUT12353-012
    72EXTENSION 1.500 - 1.62512341-01
    73EXTENSION 1.625 - 1.75012342-01
    74EXTENSION 1.750 - 1.87512343-01
    75EXTENSION 1.875 - 2.00012344-01
    76EXTENSION 2.000 - 2.12512345-01
    77EXTENSION 2.125 - 2.25012346-01
    78EXTENSION 2.250 - 2.37512347-01
    79EXTENSION 2.375 - 2.50012348-01
    80EXTENSION 2.500 - 2.62512349-01
    81EXTENSION 2.625 - 2.75012350-01
    82EXTENSION 2.750 - 2.87512351-01
    83EXTENSION 2.875 - 3.00012352-01
    84KEY, HEX 9/64"30854-01
    85PIN, RANGE EXT. ADJ.25122-01
    86WRENCH, SPANNERPT057111
    87CASE ONLY, WOOD84ZZ-41NOT SHOWN