/  Precision Measuring Tools  /  Precision Hand Tools  /  

Bore Gages

  /  

Dial Bore Gages

 /

84MAZ-161-6J

00036

84MAZ-161-6J Dial Bore Gages (127 - 203.2mm Range) 00036

Starrett 84 bore gages allow for bore measurements beyond the size range of our 82 Series. They are comparison gages and should be set with a master ring gage, gage blocks with parallel jaws, outside micrometers or vernier calipers. Ring gages are available by request, quoted by application. Good practice is to set the gage to zero, as near to the desired dimension as possible. 127-203.2mm Range 0.002mm Grad

Note:
This item is discontinued. Please consider the recommended alternative listed above or contact our special order department at (978) 249-3551 x410 for more information.

Features
Specifications
Parts
Contact Starrett

Features

  • Can be easily held to inspect bores and hole sizes without removing the workpiece
  • An adjustable range screw and two centralizing plungers provide accurate, three-point contact for tool alignment in larger bores
  • All contacts and centralized plungers are of hardened tool steel for wear and spring-loaded for sensitivity
  • The housing and knurled handle are aluminum for light weight and good balance
  • Dial indicators have jewel bearings for sensitivity
  • Furnished in finished wood case
  • Bore depths are also available up to 12" (300mm) in 1" (25mm) increments on special order
  • Also available with carbide contacts or electronic indicators with output capability on special order

Specifications

  • Range (mm): 127 - 203.2mm
  • Graduations (mm): 0.002mm
  • Approximate Measuring Depth (mm): 150mm

Parts

    Member of Kit
    Item #DescriptionPart No.QtyInformation
    1HOUSING CLAMP12271-01
    2HOUSING12270-01
    3HANDLE12370-01
    4HANDLE CAP12272-01
    5SCREW, #8-32 SHCS X .375 LONG30970-02
    6BORE GAGE SUB-ASSEMBLY12377-01
    7•EXTENSION HOUSING ASSEMBLY12285-01
    8•EXTENSION PLUNGER12288-01
    9•RING, EXT RETAINING11445-01
    10•SPR WSHR, .190X.281X.00606822-01
    11•SPRING, .196X.238X1.0625X.021 X1113429-01
    12•TRANSFER BUSHING12328-01
    13•90 DEGREE TRANSFERNOT AVAILABLE1
    14•DOWEL PIN, 1.5MM X 8MM, HARDENED STEEL (ALLOY STEEL)12326-01
    15•SCREW, #5-40 SLOT X .438 LONG13470-03
    16•SCREW, #5-40 SET X .281 LONG13390-01
    17•NUT,#5-40 HEX13414-01
    18•GAGE HEAD SUB-ASSEM12308-01
    19•SPRING RETAINING RING12318-02
    20•PLUNGER CONACLE SPRING12319-02
    21•CENTRALIZER PLUNGER12320-02
    22•MEASURE PLUNGER12321-01
    23•STOP PLUG12335-01
    24•CENTRALIZER COMPRESSION SPRING12336-01
    25•CENTRALIZER12337-01
    26•PLATE,COVER13426-01
    27•SCREW, #1-64 SLOT X .135 LONG13468-03
    28NUT,.312-40 HEX13430-04
    29EXTENSION ROD 5.000 - 5.75012366-01
    30EXTENSION ROD 5.750 - 6.50012367-01
    31EXTENSION ROD 6.500 - 7.25012368-01
    32EXTENSION ROD 7.250 - 8.00012369-01
    33DIAL IND, 84MA-161-612391-01
    34•CASE SUB-ASSEMBLY FOR 2 TO 3 GEARPT227001
    35•GUIDE09347-01
    36•SCREW, #1-64 SLOT X .154 LONGPT093482
    37•WSHR,.100X.187X.025PT093502
    38•SCREW, #3-56 SLOT X .556 LONGPT093522
    39•PIN, .042X.187PT093581
    40•WSHR,.157X.218X.078PT093591
    41•RACK, .5MM RANGE09490-01
    42•SPRING, .166X.186X.500X.010X6PT095881
    43•10mm PLASTIC STEM CAP26402-01
    44•BACK, FLAT STEEL #25PT06608J1
    45•CLAMP SCREW12289-01
    46•BEZEL CLAMP, PLASTIC23417-01
    47•HAND, #25PT083081
    48•SCREW, #4-48 SLOT X .231 LONGPT092841
    49•DIAL STAT. 84MA-161-625694-01
    50•DIAL, MOVABLE90697-01
    51•SCREW, #3-56 PHILLIPS X .190 LONGPT093074
    52•BEZEL & CRYSTALPT994191
    53••BEZEL IND., PLASTICPT234161
    54••CRYSTAL, #25PT066221
    55•CONTACT POINTPT072151
    56•HAND, #25 TELL TALEPT066611
    57•SPR WSHR,1.593X2.020X.006PT06673A1
    58•PIN, RACK GUIDE #25PT068481
    59•BRIDGE/PLATE ASSEM.26659-01
    60••BRIDGE SUB ASSEMBLY09400-01
    61•••BRIDGE #2509408-01
    62•••BEARING, JEWEL #25PT094221
    63•••BEARING,JEWELPT094213
    64•••PIN, .094X.30009425-02
    65••PLATE SUB ASSEMBLY09437-01
    66•••PLATE09389-01
    67•••BEARING,JEWELPT094214
    68•••PIN, .093X.11109431-02
    69••HAIRSPR GEAR ASSEM.PT092891
    70••SCREW, #3-56 PHILLIP X .263 LONGPT094244
    71••SCREW, #1-64 SLOT X .148 LONG23449-01
    72••POST, HAIRSPRING09418-01
    73••PINION, HANDPT089731
    74••GEAR, RACK ASSEMBLY11852-01
    75••GEAR, INTERMEDIATE ASSEM.PT092951
    76KEY, HEX 9/64"30854-01
    77PIN, RANGE EXT. ADJ.14387-01
    78WRENCH,RANGE EXT ADJ14388-01
    79CASE ONLY, WOOD84ZZ-61NOT SHOWN