/  Precision Measuring Tools  /  Precision Hand Tools  /  

Indicators & Gages

  /  

Special Function Dial Gages

 /

685-2Z

63693

685-2Z External Chamfer Gage 63693

These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 3/16-1" Range In case of wear, the gage may be adjusted to read the proper number.

Features
Specifications
Parts
Downloads
Contact Starrett

Features

  • When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
  • No setting master is necessary
  • Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face
  • Gages are also available with electronic indicators on request
  • Deluxe Padded Case
  • All ground surfaces are of hardened tool steel
  • Indicators are AGD design

Specifications

  • Type: Chamfer Gage
  • Range (in): 3/16 - 1"
  • Dial Reading: For 0 -90 Degree Angles

Parts

    Member of Kit
    Item #DescriptionPart No.QtyInformation
    1BODY-CHAMFER GAGE23673-01
    2STEM INSERT23749-01
    3GAGE HEAD #685-223666-01
    4HEAD NUT24025-01
    5SPR, .640X.716X2.500 COMPRESSION23684-01
    6NUT,INDICATOR COLLET23654-01
    7CONTACT POINT10643-D1
    8INDICATOR06802-01
    9•CASE SUB-ASSEMBLY FOR 2 TO 3 GEARPT227001
    10•RACK, .550 RANGE90990-01
    11•PIN, RACK GUIDE #25PT093421
    12•GUIDEPT093441
    13•SCREW, #1-64 SLOT X .154 LONGPT093482
    14•SPRING, .105X.125X.4688X.010PT066261
    15•BRIDGE/PLATE ASSEM.09908-01
    16••SCREW, #3-56 PHILLIP X .263 LONGPT094244
    17••SCREW, #1-64 SLOT X .148 LONG23449-01
    18••POST, HAIRSPRING09418-01
    19••PINION, HANDPT089731
    20••HAIRSPR GEAR ASSEM.PT092891
    21••GEAR, RACK ASSEMBLYPT093031
    22••BRIDGE SUB ASSEMBLYPT094101
    23•••BRIDGE #2509414-01
    24•••BEARING, JEWEL #25PT094221
    25•••BEARING,JEWELPT094212
    26•••PIN, .094X.30009425-02
    27••PLATE SUB ASSEMBLY09429-01
    28•••PLATE09396-01
    29•••BEARING,JEWELPT094213
    30•••PIN, .093X.11109431-02
    31•SCREW, #3-56 SLOT X .556 LONGPT093522
    32•WSHR,.100X.187X.025PT093502
    33•BACK, FLAT PLASTIC #25PT261601
    34•SCREW, #3-56 PHILLIPS X .190 LONGPT093074
    35•BEZEL & CRYSTAL ASSEMBLY, #25 SERIESPT994191
    36••BEZEL IND., PLASTICPT234161
    37••CRYSTAL, #25PT066221
    38•SPR WSHR,1.593X2.020X.006PT06673A1
    39•HAND, #25PT083081
    40•HAND, #25 TELL TALEPT066611
    41•DIAL,STAT. 0-90 0.D.23680-01
    42•DIAL, MOVABLE #25PT110401
    43•SCREW, #4-48 SLOT X .231 LONGPT092841
    44•CAP, CASE STEM09903-01
    45•BEZEL CLAMP, PLASTIC23417-01
    46•SCREW, .140-40 CLAMP X .281 LONGPT111551
    47CASE ONLY, STEEL/VINYL690ZZ-11NOT SHOWN

Downloads

    Catalog 33 - Section 5 - Dial and Electronic Indicators and Gages

    We offer a variety of each of the major classes: mechanical dial, electronic display, lever style test and back plunger. Indicator requirements are very specific and Starrett offers everything you need: a broad line of each indicator type, an extensive range of accessories to configure and position the gage, and as needed, an indicator-based, custom engineered solution.

    Precision Hand Tools (Catalog 33)

    612 page catalog featuring precision hand tool, force measurement, vison systems, optical comparators, laser measurement, and flat stock.