/  Precision Measuring Tools  /  Precision Hand Tools  /  

Indicators & Gages

  /  

Special Function Dial Gages

 /

683M-2Z

64990

683M-2Z Metric Internal Chamfer Gage 64990

These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 0-12.7mm Range In case of wear, the gage may be adjusted to read the proper number.

Features
Specifications
Parts
Contact Starrett

Features

  • When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
  • No setting master is necessary
  • gages will measure the smallest diameter of any chamfer within the range of angles printed on the dial face of the gage
  • Gages are also available with electronic indicators on request
  • Deluxe Padded Case
  • All ground surfaces are of hardened tool steel
  • Indicators are AGD design

Specifications

  • Type: Chamfer Gage
  • Range (mm): 0 - 12.7mm
  • Dial Reading: For 0 -90 Degree Angles

Parts

    Member of Kit
    Item #DescriptionPart No.QtyInformation
    1BODY, CHAMFER GAGE24650-01
    2GAGE HEAD #683 0-1/223660-01
    3HEAD NUT, .50023676-01
    4NUT,INDICATOR COLLET23654-01
    5CONTACT POINT,1 1/4"PT06677C1
    6SPRING, .250X.306X2.125X.028X2 323647-01
    7INDICATOR (METRIC), FOR CHAMFER GAGE28387-01
    8•DIAL,STAT. MET 0-9026798-01
    9•DIAL,MOVABLE BRENCOR92078-01
    10•CASE SUB-ASSEMBLY FOR 2 TO 3 GEARPT227001
    11•SCREW, #4-48 SLOT X .231 LONGPT092841
    12•CAP, CASE STEM09903-01
    13•BEZEL CLAMP, PLASTIC23417-01
    14•SCREW, .140-40 CLAMP X .281 LONGPT111551
    15•RACK,13MM RANGE26797-01
    16•PIN, RACK GUIDE #25PT093421
    17•GUIDEPT093441
    18•SCREW, #1-64 SLOT X .154 LONGPT093482
    19•SPR, .139X.159X.050 RETURN09593-01
    20•BRIDGE/PLATE ASSEM.11268-01
    21••SCREW, #3-56 PHILLIP X .263 LONGPT094244
    22••SCREW, #1-64 SLOT X .148 LONG23449-01
    23••POST, HAIRSPRING11287-01
    24••PINION, HANDPT089731
    25••HAIRSPR GEAR ASSEM.09289-R1
    26••GEAR, RACK ASSEMBLYPT118531
    27••BRIDGE SUB ASSEMBLYPT094101
    28•••BRIDGE #2509414-01
    29•••BEARING, JEWEL #25PT094221
    30•••BEARING,JEWELPT094212
    31•••PIN, .094X.30009425-02
    32••PLATE SUB ASSEMBLY09429-01
    33•••PLATE09396-01
    34•••BEARING,JEWELPT094213
    35•••PIN, .093X.11109431-02
    36•SCREW, #3-56 SLOT X .556 LONGPT093522
    37•WSHR,.100X.187X.025PT093502
    38•BACK, FLAT PLASTIC #25PT261601
    39•SCREW, #3-56 PHILLIPS X .190 LONGPT093074
    40•BEZEL/ CRYSTAL ASSEMBLYPT994191
    41••BEZEL IND., PLASTICPT234161
    42••CRYSTAL, #25PT066221
    43•SPR WSHR,1.593X2.020X.006PT06673A1
    44•HAND, #25PT083081
    45•HAND, #25 TELL TALEPT066611
    46CASE ONLY, STEEL/VINYL690ZZ-11NOT SHOWN