63686

683-3Z Internal Chamfer Gage 63686

These gages directly measure the diameter of chamfered holes. No setting master is necessary. When the three-blade plunger is pressed against a fl at surface, the gage should read the set number stamped on the back of the indicator. In case of wear, the gage may be adjusted to read the proper number. 0-1" Range In case of wear, the gage may be adjusted to read the proper number.


Contact Starrett

Features

  • When the three-blade plunger is pressed against a flat surface, the gage should read the set number stamped on the back of the indicator
  • No setting master is necessary
  • Internal gages will measure the largest diameter of any chamfer that has an included angle within the range of angles printed on the dial face
  • Gages are also available with electronic indicators on request
  • Deluxe Padded Case
  • All ground surfaces are of hardened tool steel
  • Indicators are AGD design

Specifications

  • Type: Chamfer Gage
  • Range (in): 0 - 1"
  • Graduations (in): .001"
  • Dial Reading: For 0 -90 Degree Angles

Parts

    Member of Kit
    Item #DescriptionPart No.QtyInformation
    1BODY-CHAMFER GAGE23673-01
    2STEM INSERT24660-01
    3GAGE HEAD #683 0-1"23664-01
    4HEAD NUT, 1.00023677-01
    5SPR, .640X.716X2.500 COMPRESSION23684-01
    6CONTACT, BALL ENG 4-48, 3mm DIA, BLACK01761-01
    7NUT,INDICATOR COLLET23654-01
    8INDICATOR FOR 68328357-01
    9•CASE SUB-ASSEMBLY FOR 2 TO 3 GEARPT227001
    10•SCREW, #4-48 SLOT X .231 LONGPT092841
    11•CAP, CASE STEM09903-01
    12•BEZEL CLAMP, PLASTIC23417-01
    13•SCREW, .140-40 CLAMP X .281 LONGPT111551
    14•RACK, .550 RANGE90990-01
    15•PIN, RACK GUIDE #25PT093421
    16•GUIDEPT093441
    17•SCREW, #1-64 SLOT X .154 LONGPT093482
    18•SPRING, .105X.125X.4688X.010PT066261
    19•BRIDGE/PLATE ASSEM.09908-01
    20••BRIDGE SUB ASSEMBLYPT094101
    21•••BRIDGE #2509414-01
    22•••BEARING, JEWEL #25PT094221
    23•••BEARING,JEWELPT09421(2)2
    24•••PIN, .094X.30009425-02
    25••PLATE SUB ASSEMBLY09429-01
    26•••PLATE09396-01
    27•••BEARING,JEWELPT094213
    28•••PIN, .093X.11109431-02
    29••SCREW, #3-56 PHILLIP X .263 LONGPT094244
    30••SCREW, #1-64 SLOT X .148 LONG23449-01
    31••POST, HAIRSPRING09418-01
    32••PINION, HANDPT089731
    33••HAIRSPR GEAR ASSEM.PT92891
    34••GEAR, RACK ASSEMBLYPT093031
    35•SCREW, #3-56 SLOT X .556 LONGPT093522
    36•WSHR,.100X.187X.025PT093502
    37•BACK, INDICATOR #25PT261601
    38•SCREW, #3-56 PHILLIPS X .190 LONGPT093074
    39•BEZEL/ CRYSTAL ASSEMBLYPT994191
    40••BEZEL IND., PLASTICPT234161
    41••CRYSTAL, #25PT066221
    42•SPR WSHR,1.593X2.020X.006PT06673A1
    43•HAND, #25PT083081
    44•HAND, #25 TELL TALEPT066611
    45•DIAL,STAT. 0-90 I.D.23679-01
    46•DIAL,REVERSE 25-441RPT11040R1
    47CASE ONLY, STEEL/VINYL690ZZ-11NOT SHOWN